某船用柴油机排气管路流-固耦合计算与保温效果研究

对某船用柴油机排气管路的流动与传热过程开展流-固耦合仿真分析。结果表明:受排气管路结构影响，管内流动方向和流速发生变化，局部区域产生明显的回流现象；排气管路外表面温度分布差异较大，平均温度高达534 ℃。为达到柴油机安全设计要求，在排气管路外壁敷设保温材料。分析结果表明:气凝胶纳米材料的保温效果优于硅酸铝纤维材料，在相同的运行条件和使用要求下，气凝胶纳米材料的敷设厚度更薄。     

一种波长调制干涉仪光强实时反馈控制系统

提出了一种实时反馈控制系统,保证波长调制干涉仪的激光光强在波长调谐过程中的稳定性,以减小波长调制干涉仪因激光光强的波动产生的相位误差。该控制系统由光电探测器、数据采集卡、光电调幅器和控制软件等组成。实验结果表明,该系统的响应速度超过了干涉仪获取干涉图的速度,不仅能够稳定输出理想的光强值,而且还提高了干涉仪的测量精度。     

Effect of nonsolvent additives on PES ultrafiltration membrane pore structure

Different nonsolvent additives, namely, diethylene glycol, n-butyl alcohol (NBA), and ethylene glycol monomethyl ether, were added into the casting solution (polyethersulfone/dimethylformamide/lithium chloride) to prepare ultrafiltration (UF) membrane via phase inversion. The effects of different additives and their concentration on the pore structure of the prepared UF membrane were studied. The cross-sectional morphology of the membrane was observed via scanning electron microscopy. The addition of nonsolvent additives improved the large-cavity structure of the membrane. When the additive was low-content NBA (1–3 wt %), the membrane pore structure transformed from large-cavity structure to fully sponge-like structure. When the content of additive NBA was 3 wt %, the flux of the prepared UF membrane was 130.45 L (m⁻² h⁻¹), the rejection of PEG20000 was 95.54% and the flux remained high at 4 bar in long-term stability test. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47525.     

Study on Thermal Deformation Measurement of Optical Remote Sensing Satellite Platform Based on Machine Vision

To solve the special requirements of the high orbit optical remote sensing-satellite for the thermal deformation of the platform, the thermal deformation test and measurement scheme of the satellite platform is designed. Through the comparative analysis of test results, the rationality of the thermal deformation design of the platform structure is verified. The results of thermal deformation measurement show that the maximum deformation of A camera mounting surface is 57.5~〃, and the maximum deformation of B camera mounting surface points to 79.3~〃, which can be used as the basis for thermal deformation prediction of satellite during the orbit operation.     

Modeling and analysis for multilayered complex communication network of satellite navigation system

This study is extended to construct the network model, the node model, and the link model of complex communication network for satellite navigation system (CCN‐SNS) based on the hierarchical architecture. Firstly, a method called snapshots was proposed to describe the dynamic topology for CCN‐SNS; secondly, another method was put forward to model the different nodes of the CCN‐SNS; thirdly, the different links between every two different nodes were modeled. Therefore, based on the OPNET tools, a simulation for the CCN‐SNS, which contains the models that proposed earlier used to analyze the navigation accuracy and network transmission performance, was performed.     

Neutron Diffraction and Neutron Radiography Investigation into Powder Sintering of Ti/Al and TiH2/Al Compacts

Metallurgical and Materials Transactions B - Sintering behaviors of two types of powder compact, i.e., Ti/Al and TiH2/Al, under vacuum were studied using in situ neutron diffraction, in situ...     

Preparation of fused silica membrane with high performance for high temperature gas filtration by sealing and spray coating

In order to improve the gas permeability and thermal shock resistance of the ceramic membranes applied in high temperature gas-solid separation techniques, fused silica and graphite particles were used as the primary raw material and pore-former agent, and the spray coating based-on PVA sealing was applied to prepare the separation membrane. These approaches remarkably decreases filtration resistance by increasing support permeability and reducing the intrusion of ceramic membrane forming particles into the support as well as the thickness of the membrane. The fabricated membrane had an average pore diameter of 9.85?μm and a gas permeability value of 8.2?×?10⁴?m³/(m² h bar), its dust removal efficiency reached 98.6%.     

Study on the long-term behaviour of glass fibre in the tensile stress field

Glass fibre is a random network structure composed of [SiO₄] tetrahedra. The structure contains a large number of defects, which act as crack initiation points. Under tensile stress, cracks undergo crack initiation, stable propagation, failure propagation, and fracture, and the stress that begins after unstable propagation is called the critical fracture stress. When the stress is less than the critical value, the crack is subject to the force of chemical bonds during the crack propagation process, and crack arrest occurs. When the stress is greater than the critical value, the glass fibre will undergo destructive fracture. In this paper, long-term tensile tests were carried out on glass fibre and a glass fibre composite under different constant tensile stress conditions. The fracture times of the glass fibre and glass fibre composite under different tensile stresses were obtained, the critical fracture stress of glass fibre was inferred, and the fracture mechanism was explained.     

鲁固特高压直流黄河大跨越导线与地线选择

鲁固特高压直流,是继±660 kV银东线、±800 kV昭沂直流后的第3条外电入鲁直流输电通道,在山东境内跨越黄河,主跨越档距超过1 300 m,最高铁塔高度接近140 m,设计阶段需按照大跨越设计。结合工程实际,重点介绍黄河大跨越的导线与地线选择,包括选择原则、导线材质的确定、载流量计算、电气特性、机械特性、经济特性的计算,给出了导、地线的选型意见,可为后续工程的黄河大跨越提供设计参考。